Destiny 2 код ошибки currant

How to Fix Destiny 2 Error Code ‘Currant’

Some Destiny 2 players are getting frequent disconnects with the error code ‘currant‘. In most cases, this error code is reported to occur when players try to load into any launch destination – the game just sits idle for several seconds before showing the ‘Currant‘ error code.

Currant Error Code in Destiny 2

After investigating this particular issue, it turns out that this error code can occur due to several different causes. Here’s a shortlist of potential culprits:

Method 1: Checking for server issues

Before you try any of the potential fixes below, you can potentially save yourself a lot of troubleshooting time by checking if the Destiny 2 servers are currently dealing with an outage problem.

In case other users in your area are encountering the same ‘currant‘ error code, it’s clear that the issue is outspread. If this scenario is applicable, there’s little else you can do other than wait for Bungie to fix those issues.

Start by using services like DownDetector and Outage. Report seeing if other users are currently reporting the same error code.

Checking the server status in Destiny 2

If the investigations you just performed have revealed some underlying server issues, take a look at the fan-made status page of Destiny 2 to see if the server you’re connected to is currently affected by the server problem.

Another thing you can do is visit the official Twitter page of Bungie’s support account to see if they made any official announcements regarding the issue.

If the investigations you just performed didn’t reveal any server issues, it’s clear that the problem is occurring due to something specific to your network configuration. In this case, you can start troubleshooting with the next methods below.

Method 2: Restart or reset your router

Since the most common instance that will trigger the ‘currant‘ error code in Destiny 2 is a common network inconsistency, you should start simply by restarting your router, allowing it to re-assign network TCP / IP data to the device where you’re playing the game.

This procedure will fix those cases where a low-end router is unable to allocate enough network resources to sustain a connection with the game server. But in this case, it’s also recommended that you disconnect non-relevant devices from taking up precious Internet bandwidth.

Next, perform a simple router reboot either by pressing the power button once (on the back of the router) or by physically unplugging the power cable from the power outlet.

After you do this, wait for a full minute to ensure that the power capacitors are completely drained.

Next, power your router On again and see if the issue is now resolved. In case you are still seeing the same ‘currant’ error code while attempting to connect to an online game in Destiny 2, you should also go for a router reset.

But before you go forward with this operation, be advised that this procedure will reset any custom credential, settings, and adjustments that you previously made to your router settings – It will essentially return it to the factory settings.

If you don’t mind loosing forwarded ports, blocked/whitelisted devices and custom settings, use a sharp object (small screwdriver, toothpick, needle, etc.) to press and hold on the Reset button on the back of your router.

Press and hold the reset button until you see the front LEDs flashing at the same time. This is the signal that the reset procedure has been succesfull.

LEDs flashing at the same time

Next, reconfigure your router to restore Internet access and see if the problem is now resolved.

Note: If your ISP is using PPPoE, you will need to re-validate your ISP credentials once again.

In case the same problem is still occurring, move down to the next potential fix below.

Method 3: Power cycling your device

If the method above didn’t work for you and you have previously made sure that the error code is not appearing due to a server issue, your next target should be temporary data maintained by your platform of choice.

If you’re playing the game on a PC, a simple restart will do the job. Just restart conventionally, launch the game again once the next startup is complete and see if you’re still seeing the currant error code.

However, if you’re seeing this error on a console, as simple restart will not be sufficient. In this case, you will need to go for a power cycling procedure to clear any temp data that is preserved in-between restarts.

If this scenario is applicable, follow the instructions below to perform power cycling procedures on PS4 & Xbox One (depending on the platform where you’re seeing the error on):

A. Power cycle your Xbox One Console

B. Power cycling your Playstation 4 Console

How to fix Destiny 2 “Currant” error code

Destiny 2 “Currant” error code – Errors of this nature are actively monitored by Bungie to inform us of any ongoing issues affecting users. These problems often occur when there are interruptions between host and client connections due to circumstances outside of our network.

This can be the result of problems with the access provider, packet loss, difficulties with various network equipment such as Wi-Fi interference, and other variables that affect overall connection stability. Scroll down to learn more about Destiny 2, and Currant error code in this Techquack article.

What causes the Destiny 2 Currant error code

What causes the Destiny 2 Currant error code

So, what does the Destiny 2 Currant error code mean? According to Bungie’s official help article, Currant errors are those errors that the team actively monitors because they are connectivity issues. The reasons why players can get Currant errors, according to Bungie, are as follows:

How to fix the “Currant” error code in Destiny 2

How to fix the "Currant" error code in Destiny 2

Check if there is a problem with the server

Before you try any of the possible solutions below, you can save yourself a lot of troubleshooting time by checking to see if Destiny 2’s servers are currently experiencing any issues with outages.

If other users in your environment are getting the same “Currant” error code, obviously the problem is widespread. If so, there’s nothing left for you to do but wait for Bungie to fix these issues.

If your investigation reveals no problems with the server, the problem is obviously related to something specific in your network configuration. If this is the case, you can begin troubleshooting using the following methods.

Rebooting or resetting your router

Since the most common case that causes a “Currant” error code in Destiny 2 is often a network mismatch, you should start by restarting your router so that it can reassign TCP/IP data from the network to the device you’re playing on.

If the problem persists, proceed to the following solution.

Turn off your device

If the above method did not work, and you have previously verified that the error code is not related to a server problem, your next destination should be the temporary data managed by the platform of your choice.

If you are playing the game on a PC, a simple reboot will do. Just reboot the usual way, restart the game after the next run, and see if the current error code is still displayed.

However, if you see this error in the console, a simple restart will not help. In this case, you need to run a power cycle to erase any temporary data that was stored between restarts.

If this scenario applies, follow the instructions below to perform a power cycle on the PS4 and Xbox One (depending on the platform where the error occurred):

Turn off your Xbox One console

Turn off the Playstation 4 console

Frequently Asked Questions

What is the Currant error code?

It can be caused by problems with your ISP, packet loss, difficulties with various network equipment, Wi-Fi interference, and other variables that affect the overall stability of your connection. As a first step, we recommend that players make sure their current connection is working as it should rule out any external variables.

How can I fix the Currant error?

If you are playing the game on a PC, a simple restart will help you with the problem. Just restart the game the normal way, restart the game after the next launch and see if you still see the Currant error. However, if you see this error on the console, a simple restart will not help.

What is the «honeydew» error code?

According to the help section on the Bungie website, HONEYDEW appears when «public activity access has been manually overridden by Bungie.» This happens when Destiny 2’s servers are down, and appears to players in the middle of an activity when they try to start a new one.

Источники:

https://appuals. com/how-to-fix-destiny-2-error-code-currant/

https://techquack. com/how-to-fix-destiny-2-currant-error-code/

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: