Код ошибки 2000 0142

How To Fix Dell Error Code 2000 0142

At the point when our computers are working legitimately, they’re completely a shelter to our efficiency, yet when they fall flat, they will in general make us feel more idiotic. When you hard drive is kicking the bucket, you will get clear indications like consistent data corruption, solidifying when copying data, long start-up times, and steady repair screens amid boot.

If you experience an DELL error code 2000 0142, it means that there is a major issue with your computer’s hard drive. Indeed, this could be because of CPU disappointment, working framework crash, hard drive inability to finish an individual test, and numerous others.

Different Methods To Fix Dell Error code 2000 0142

Sol 1: Run S. M.A. R.T Test on your system

Step 1: Restart your PC/laptop and enter the BIOS Setup utility. If you are using Windows Vista or later version, continually press the F12 key while your framework is booting. For Windows XP, press the F1 key on a continuous basis to enter the BIOS Setup Utility.

Step 2: Choose the influenced hard drive and press Enter. Select SMART Support and again press Enter.

Step 3: Follow the given device test on your device.

Step 4: Once the test is finished, press Esc key.

If the above solution doesn’t work effectively, try out the second solution.

Sol 2 : Fixing the PSA or PSA error codes

Companies like Dell often face the hard drive error code 2000 0142. Dell is the company that uses a unique and proprietary hardware in the systems. In case system is unable to read your hard drive it occur due to error code 0146

By fixing the PSA or PSA v4236 error code 2000 0142, you can fix the issues with your Dell hard drive. Follow the below mentioned steps to begin with.

Step 1: Restart your Dell and over and again press F12 to enter One-time Boot Menu and pick Diagnostics. Adhere to the on-screen guidelines to finish the procedure. On the off chance that the test falls flat, note down the approval and error code.

Step 2: Browse to the Dell Support webpage, enter your Service Tag, click Submit and Diagnostic.

Sol 3 : Run Support Assist and check for any hardware or programming issue

On the off chance that your PC/laptop is secured under hardware guarantee, you can contact the Dell service department for necessary assistance. Besides, before fixing the error 0142, make sure to back up the entirety of your vital data as there is a likelihood that the procedure may wipe it out. In any case, without reinforcement, you can select a data recuperation programming to recover your data from the HDD.

If nothing works, essentially supplant the influenced HDD with the upgraded one and restore every one of your data.

To resolve the issues on how to resolve Dell laptop Error Code 2000 0142, you can use any of the above mentioned solutions. In case of further assistance, you can contact tech experts for help. Contact the experts via helpline number and ask for the support.

Also, find here a complete guide to fix more issues/errors such as How To Connect HP Laptop To WiFi In Windows 7 & 10 and HP Laserjet p3015 Error 51.10. The steps are well-described and you will be able to follow them without any problem. With us, you get guaranteed solutions to fix all the types of errors or issues under a single roof.

How to Fix DELL Diagnostic Error 2000-0142

When you hard drive is dying, you will get obvious symptoms like constant data corruption, freezing when copying or saving data, long start-up times, and constant repair screens during boot. However, you cannot tell for sure if the problem resides with the HDD unless you do a Pre-boot System Analysis (PSA). Dell computers allow a comprehensive PSA, also known as ePSA, which tests all the hardware on the system. These include memory tests, drive tests, fan tests, input devices tests and HDD tests among others. To run ePSA on dell, restart your PC and press F12 to get into the boot menu, and then select ‘diagnostics’. Following the mentioned symptoms, it is very alarming when users get a diagnostics error indicating a disk failure. This error bares the following information.

MSG: Error Code 2000-0142

MSG: Hard Drive 1 – Self Test Unsuccessful Status 79 or Msg: Hard Drive 0 – S/N WX51E43XWS20, short self test unsuccessful

The given code and message can be used by Dell Technical Support to help diagnose the problem. Do you want to continue testing?

This error will throw your PC into an endless loop on startup repair. So what does this error mean? And what are the solutions to it? This article will address this problem and give attempts to solving it.

Error 2000-0142

To put it simply, this error means that the ePSA could not successfully read information from the hard drive. By extension, your computer will not start, or will have trouble starting because retrieving information from the disk is not reliable. Windows will however attempt a system startup repair to no avail. Here are a few of the varied reasons that you might be bringing up this error message on your Dell computer:

If you get this error, it means your drive is dead, or it is dying and failure is imminent. It is paramount that you back-up your data pending complete failure. You can attempt reviving the disk with the first 2 methods below so that you can pull any important data off it. Remember that if the method works, you will need a hard drive replacement because 95% of the time, these hard drives cannot last beyond a week after this error.

Method 1: Perform a disk check in command prompt using a windows installation disk

The Master Boot Record holds information on the location of your OS, and kernel. This tells your computer from where to load the OS. In the case of a corrupt MBR, this method will attempt to recover any corrupt data. If it works for you, we recommend backing up your data to a new disk since the error you experienced indicates imminent disk failure. You will need a Windows disk (Win 7) for this method. You can find our guide on making a Windows 10 disk https://appuals. com/how-to-create-windows-10-bootable-usb-using-rufus/ or a Windows 7 disk https://appuals. com/create-windows-bootable-usb-or-dvd/.

Method 2: Reinstall Windows

This method will also correct any corrupt windows files, or any corrupt or missing MBR data. Go https://appuals. com/how-to-clean-install-windows-10/ for a guide on how to clean install Windows 10. If you prefer, you can install Windows 8 or Windows 7. In case this works for you, we recommend backing up your data since the error you experienced indicates imminent disk failure.

Method 3: Replace your Hard Drive Disk

If method 1 and 2 did not work in any way, then your disk has experienced permanent failure and will need replacement. Look into the SSD (Solid State Drives) instead of the HDD (Hard Disk Drive), to avoid this disappointment in the future. Since HDDs use spinning platters and moving heads, they are more prone to failure. This usually happens after 3 – 5 years of use.

If the system is under warranty, contact Dell support with the error and they’ll replace the drive. Your manufacturer warranty usually covers a failed HDD.

Method 4: Slave the erroneous hard disk and try to recover data

You can still try recovering your data if your disk failed method 1 and 2. There is no guarantee. You will need an external USB HDD converter for a few dollars (10$). You can also connect it as a secondary drive (not the primary that has the OS) to another computer. Desktop PCs usually provide extra cables for connecting another SATA drive. Use either method to try to read your disk. If it is only your MBR sector or Windows files that was corrupt, you will find that you can still be able to read your HDD and access your data.

Data experts can be able to retrieve your information by changing the read heads or taking your platter onto functioning read heads. Either way, this is a precision process that will cost you a lot of money, so make sure the data you are saving is worth the money.